FARGO electronic HDP600 CR100 User Manual download pdf (Page 25)

RESTRICTED USE ONLY Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)

2-7

Technical Specifications

Term Description

Accepted

Standard Card

Sizes

HDP600 and HDP600-LC (See Card tab under Printer

Adjustments):

 CR-80: This selection is the default form size for the HDP600.

This will print a 3.375 in. L x 2.125 in. W (85.6mm L x 54mm W)

image including a .04 over-bleed on each of the 4 sides. This

makes the overall form size 2.204 X 3.452 (56 X 87.7 mm).

 CR-80 No Over-Bleed: This selection eliminates the over-

bleed on both the leading and trailing edge making the form size

of 3.374 in. L x 2.2 in. W (85.7mm L x 56mm W). Note: This

selection is used to improve the overall readability of barcodes.

 Custom: This selection is used to create a custom form size

from 1.0 x 3.0 to 2.204 to 3.452 (25.4 X 76.2 mm to 56 X 87.7

mm).

HDP600 CR100 and HDP600-LC CR100 (same reference):

 CR-100: This selection is the default form size for the HDP600

CR100. This will print 3.88 in. L x 2.63 in. W (98.5mm L x 67mm

W) including a .04 over-bleed on each of the 4 sides.

This makes the overall form size 3.92 in. L x 2.67 in. W

(98.9mm L x 71mm W). The CR-100 size PolyGuard applies

only if laminating with HDP600-LC CR100.

 CR-100 No Over-Bleed: This selection eliminates the over-

bleed on both the leading and trailing edge making the form size

of 3.88 in. L x 2.63 in. W (98.5mm L x 67mm W). (Note: This

selection is used to improve the overall readability of barcodes.)

 Custom: Select the Custom option under Card tab in the

Printer Driver. Enter the dimensions of the card into the Print

Width and Print Length boxes if using a card size that varies

from the CR-100. Add .04" (1mm) to each dimension to ensure

Edge-to-Edge printing.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 370 371

No comments

FARGO electronic HDP600 CR100 User Manual Page 25